2
INSTALLING SUPPORT INSTRUCTIONS
PLACEMENT:
Do not place the screen in the direct sunlight. Prevent the TV set from receiving
any vibration.
Do not place the TV set near extremely hot, humid or dusty places. Ensure that
provide well ventilation for the TV set.
Do not block the slots in the cabinet for ventilation to protect it from overheating
with any object.
CLEANING:
Please remove the power plug before cleaning LCD on-screen display . Wipe
your on-screen display and power outlet with clean, dry cloth.
If the on-screen display requires special cleaning, please using clean, dry cloth
to clean. Never use any liquids or cleaning fluids
.
OPERATING CONDITIONS:
Temperature 0 C~35 C Relative Humidity 20%~80%
Pressure 601hPa~1040hPa
WARNING AND CAUTION
63
Two M4*8 screw
Rational axis subassembly
Woofer plug
Woofer connecting wire
Base subassembly
Figure1
Figure2
Three M4*8 screw
Assembly steps:
1.Take out the rational axis subassembly
and cover board from accessory box and
separate them.
2.The woofer connecting wire and plug are
through square slot of rational axis, and
use two M4*8 screws to tighten the
rational axis subassembly (as figure 1)
on the base subassembly.
3.Insert the connected subassembly into the
corresponding slot on the back cover, as
figure 2 use three M4*8 screws to tighten
the complete set.
4.Push the cover board as figure 3 to the
block slot of rational axis and fixed, note
to put the woofer connecting wire into the
U slot of cover board.
5.Insert the woofer plug into the interface of
WOOFER OUT terminal.
U slot
Cover board
Figure 3