Haier HYC-260, Руководство по эксплуатации

Страница: 20 / 24

18 27
shows“1P” once again. Users can set 1P-5P again. After the setting, press the “Cal ” for 5s, and all s
ettings will be automatically saved. And then the display area of inner temperature shows the inner
temperature normally.
Note: during the said 1P-5P setting process, parameters can be specifically regulated via the
“Sensor ” (increase) or “Cal Cancel” (decrease) keys. For example,in the case that current display
area of inner temperature shows 1P (year), and the year (1P)and month (2P) need not regulation,
press the “Cal Cancel” to choose the date (3P) so as to reset the date directly. Then press the “Cal ”
and the display area of inner temperature blinks the date. Press the “Sensor ”(decrease) or
“Cal Cancel” (increase) to regulate the current date. And then press the “Cal ” to save it. After that,
the display area of inner temperature shows the hour (4P). If hour setting is necessary, press the
“Cal ” to regulate. Otherwise press “Cal Cancel” (increase) to enter the minute (5P) setting.Upon the
finish of setting, press the “Cal ” for 5s to save it and exit. Then the display area of inner temperature
shows the inner temperature normally. During the said 1P-5P setting process, after setting any
parameter, if other parameters do not need to set, press the“Cal ” for 5s to save it and exit.
Please checking the time before use, if the time is not right, follow the upper
method to adjust the time
。
HYC-940
Control panel
Handle
Light switch
Shelf
Glass door
Door lock
Leveling leg
Caster
Anti-condensation controller
（
HYC-890
）
Anti-condensation controller intelligently operates the heating on the door and cabinet parameter to
prevent condensate from forming, using the environment temperature and the humidity as input
parameters. Therefore, in environment with high humidity, the heater in the door glass and
parameter of the frame will be powered up.
Display description
The left panel window displays the temperature and humidity, and keypad is on the right side.
Display description is as follows:
It is 2-1/2 digital display, as shown in the right picture:
① Alarm symbol: displayed when alarming;
②
Heating symbol: displayed during heating operation;
③
Defrost symbol: (not used);
④
Humidity symbol: displayed when checking humidity;
Humidity display range: 20 ~ 90% RH;
Modify control humidity
Three buttons “SET”
,
“▲”
,
“▼” on the instrument are used for controller operation.
Press button “SET” for 1 second, display shows the current set operating point;
Use “▲” or “▼” to increase or decrease the set humidity value, until it reaches the desired value;
Press button “SET” for 5 seconds to confirm and exit setup.
①
②
③
④