background image

Preparation before washing
1.Connect the water inlet hose. Open 
   the water faucet.
2.Confirm that the washing machine is
   earthed reliably.  Then  insert  the
   power plug  into the receptacle. The 
   earth terminal shall not  link to gas
    pipeline and faucet water pipeline.
3.Put up  the drain hose.

4.Slanting  or  uneven  ground  may  result  in 
  unstable working or abnormal noise. Please
  make the machine stand horizontally. 

a. Check if the laundries are applicable for washing with machine.
b.Please repa ir the damaged cloth before washing in order to avoid

the situation worse

c. Divide the laundries that are not colorfast from other laundries.
d. Put those laundries difficult to absorb water into water with hand.
e. For those laundries with heavy soil, please first remove the dirt like
    mud or dust. For the parts with heavy soil, please apply detergent on

them in advance, which can make it easier to remove the soil.

f. For those laundries that may get lint ball and those with long fur, tur

Q

it over before putting in.

g. Do not put those laundries polluted by chemicals into the washing
    machine directly.

h.The foreign materials will

result in damage of the machine

0.7m<H

1.2m

Check if the 
laundries has 
special
requirement
on washing

pay attention to following before washing the laundries. 

 1  Preparation before washing 

Clear the pocket.
Take out the coin,
sand,hairpins ect.
To aviod the 
problem that 
the washing 
machine can 
not be operated 
normally. 

Tie the long 
strips; fasten 
the button; 
close zippers. 

The quantity of 
the laundries 
shall not be too 
large .Stretch 
and loosen the 
laundries before 
putting them in 
the tub.

When the pulsator 
is running,the
buttons of the 
laundries may cause 
noise.For the sake 
of discretion,please 
put the laundries 
with buttons into
other laundries.

Содержание HWM65-918P

















Отзывы: