Off
a Description of the function of buttons
Mode and meaning of the indicators
On: indicate the program about to run,or indicate the selected mode or
POWER ON/OFF
bu tton
4 Use the operation buttons
Page 12
Remain time digitron
It displays "--" during detecting.
It displays total remained time during the running program(min).
Flashing: indicate the running program, or indicate the selected mode or indicate the water level
“WATER LEVEL” button
Release the “Rinse”button and“Water level”button for more than 3 seconds ,
After a beep sound, the digitron displays “CL.”,the child
lock function is released.
Child lock function
Push and hold the“Rinse”button and“Water level”button, then push down the power on/off button. ,the digitron displays “CL”.Then
you can continue setting desired washing procedures.After setting ,push the “Start/pause” button, The child lock function is
activated.All of the buttons are locked and can’t make selection
indicate the water level
Push the power button to switch on the power
When the power is on push it again to switch off the
power .
Push the power button to switch on the power ,if the
start /pause button is not pushed the washing machine
will automatically switch off the power after 5 minutes.
When using the child lock function,if the top cover is opened,the machine will stop and display E2 alarm .After 5 seconds the
machine will automatic drainage .If you want to clear the E2 alarm ,please close the top cover and press the “Start/pause ”
button .The E2 alarm will be cleared.
It displays I remained reserved time during reserved
program(hours) .
It displays abnormal symbol in abnormal
situation.(See to Page12)
Standard
Wool
Tub Dry
Memory
Strong
Normal
Soft
Quick
Remaining
Time
Delay Time
18L
26L
34L
43L
30L
38L
47L
52L
22L
14L
3rd
2nd
1st
Water
Water
level
Power
ON/OFF
Program
S
Reserve
Spin
Rinse
Delay
Wash
After the power is switched on,press it to start
the machine.
During working, push it to pause.
During pause, push this button to restart and
go on working
“START/PAUSE” button
Program
Applicable situation
Normal
Strong
Soft
Washing the normal laundries
Washing the bigger and heavier laundries
Washing the woollen textiles or underwear
Quick
Memory
Standard
Wool
Washing the laundries with small quantity
and light soil
Tub Dry
Drying the inner tub and the outer tub,
which can avoid growing mildew
Washing the woollen textiles
The common wash, the washer will set to
Custom program including wash, rinse,
spin and water level automatically last time
Washing the normal laundries with less water
“PROGRAM” button
The washing machine can detect the laundries
automatically after detection, it will set the water level to
52L automati
Memory and Standard program.
You can also set water level by yourself.After the machine
is started, it will not set water level automatically. You
shall push the “Start/Pause” button to make new setting.
If there’s water inside the tub, the machine can not detect
the laundries and will display water level 34L .
If Quick program is selected, it will display water
level 22L,
the water level can be adjusted.
If Tub Dry program is selected, the water level will not
respond.
During operation of wash , rinse and soak program, you
can push down the water level button to add water.
When you release the button, or it reaches the overflow
water level, the machine will stop adding water.
The water level decided may be different from actual
value because of the different moisture level of the
laundries.
The water level of woollen function can only be selected
from 34L-52L.
The water level of rinse function is one level higher than
washing function.(Except the higest water level and hand
chosen rinse water level)
suitable value among level 26L,34L,43L,
-cally during the Normal,
Mins
Mins
Mins
Mins
Mins
Mins
Mins
Mins
Times
Times
Times
Rinse
Pause
