background image

Safety precautions 

Do not let the machine share one receptacle with other
electric appliances. If the plugging into the receptacles
loose, do not use the plug any more.

Do not put the machine at damp place
like the bathroom. Never wash it with
water. Do not put wet laundries on the
control panel.

Do not use water hotter than 50

.

In case the washing machine is installed
on ground with carpet, do not block the
ventilation hole with carpet.
Ensure carpet does not
obstruct the
opening in
the bases.

Do not bend ,extend, twist, bind by force. Do not press or nip it with weight.
Keep the pin of the power plug clean, if the power plug is polluted with dust,
please wipe with dry cloth carefully.
If the supply cord is damaged, it must be replaced by
the manufacturer or its service agent or a similarly
qualified person in order to avoid a hazard.

Carpet

Please plug the power plug on special 
receptacle.Be sure to use three-pins 
power receptacle .Ensure that the 
earthing terminal of the power receptacle 
is earthed reliably .Use electric
leakage protector if possible.

The washing machine must be positioned 
so that the plug is accessible .Be sure to 
pull the plug off and close the water faucet
in following cases:power failure,delivering 
the machine ,setting the machine idle 
or cleaning the  machine.
Do not plug or pull the 
power plug with wet hand. 

The ventilation 

holes at the 

bottom 

1.Do not wash water-proof laundries like 
the raincoat,bike covers etc.to aviod
abnormal vibrations in spinning.
2.When washing the floating lanudries 
(like down jacket etc.),pay attention to the
 tags.Determine whether the laundries
can be washed by the machine according 
to the tags(It can’t be washed by the 
machine if there is no tag or the  tag
doesn’t show that
the laundies 
can be washed 
by the machine .)

Содержание HWM65-918P

















Отзывы: