Haier HWM105-0626S Скачать руководство пользователя страница 9

The capacity of  washing  and spinning  of the 

machine refer  to the  weight of the

standard laundries under dry condition that can

 be washed or spinned in one time. Laundries

quantity  in one  washing cycle shall  be  lower

than   the standard  capacity.

The thickness ,size , type  of  the cloth  will influ-

ence  the actual  washing  capacity.  It is  suit-

able to put  in reasonable amount of laundries

and  the laundries can be turned round in wash-

ing for one time washing. Do  not   select  "  Maximum  "  water   level   for

 laundries  less  than  1.5kg, so as to  avoid 

splashing of water

.

Do s and Don ts

How to use the whitener

Fill water to decided level.  Dilute

 the whitener with container.

Pour it slowly into the washing tub. 

Avoid  using  whitener  on  laun-

dries with color or pattern as they

 are prone to lose color. 

The  whitener  shall  not  touch

the laundries directly. 

Direct dissolved in the machine:

1.Fill small quantity of water.

2.Add the powder .  Run for  30 

  seconds  to dissolve it completely.

3.Put in   laundries. Select suitable 

   water level.

The instant dissolving of the washing 

 powder:

1.Prepare warm water of 30 C and a 

   container.

2.Add the powder while stirring to fully

   dissolve it. 

The powder is more prone to pollute the

laundries than the detergent. Therefore

please use it with proper quantity. 

Dosage of different washing powder is

different. Please refer to the instruction

of  the  washing  powder  for  the  detail

dosage.

Refer  to  the  user's  manual  for

the usage and quantity of the

whitener.

For powder whitener, please 

dissolve it before using. 

It is suggested not to use high sudsing detergent. 

How to use the washing

powder

Usage of

 the detergent 

7

Rinse with stored water

1. Put the laundries into the wash tub. Select suitable current according to 

    the laundries.

2. Fill water to preset water level.

3. Rinse 

    Adjust the wash timer to 2-3 minutes to do rinsing.

    When the laundries quantity is few, please use "Standard" current.

    If  you  use "Strong" current,  it may splash.

Rinsing

(Repeat   the   midway  spinning  and  rinsing with stored water

for  2-3 times)

10

Rinse with water-filling

1.Put the laundries

   Put the laundries  into the wash tub. Select  suitable current according 

   to the laundries.

2.Adjust the water level

   Set the water level with water level adjusting  lever  according  to  the

  laundries  quantity. Then fill suitable water continuously

.

3.Rinse

   Adjust the wash timer to 5-7 minutes to do  rinsing.

Содержание HWM105-0626S











Отзывы: