Install the water inlet hose; Select the water level
5
How to change the direction of the drain hoses
Figure 1 indicates the ex factory
installation
position of the drain hose.
Put soft items on the ground. Lean the machine
down gently with the front
surface
facing the
ground.
T
ake
off t
he drain
hose from the cabinet.
Dismantle the drain hose fixing clamp and take
the hose
out of the fixing groove.
(See to Figure 2).
Extend the drain
hose from the side of spin tub
Figure 1
Back
Front
Soft item
Figure 2
Extend to the spin tub side
Fig ure 3
Embed the drain
hose into the
g
roove along the side
of the spin tub
in
the
order of
1 ~ 3 , heading for the
side of the spin
tub. (See to Figure 3).
Embed the drain hose into the groove with
hands. T
ake
care not to damage the drain
hose in fastening the fixing
clamp.
Insert the water inlet hose into the water-filling
entrance on the control panel
T
o
dismantle the water inlet pipe, just push the
control handle as indicated in the figure and
pull it out
Select water level according to the
quantity of the laundries.
Set the water level adjusting lever
to needed line.
Wate
r inlet
hose
Wate
r-filling
entrance
Water level indicator
Maximum
Medium
Minimum
Max
Med
Min
Maintenance
12
After using, please clean the lint and foreign materials of the lint filter and
overflow filter in time. Otherwise it may influence your using the machine.
Please first pull off the power plug from the receptacle before cleaning.
The lint filter must be used during washing.
It must be cleaned in time after each using.
Cleaning the lint filter
Figure 1
Lint f
ilter r
ear c
over
Lint filter front
cover
Disassemble
Install
Figure 2
Use the new water inlet hose provided
with the machine to connect to the
water faucet.Old hose sets should
not be reused.
Down
Dismantle
Install
Up
Lint filter:
1.Push down the spring piece of the top lint filter to
make the claws out
o
f
the filter cover,
and then
pull out the lint filter to get it down.
figure1
2.Pull the back of the lint filter
, and then you can get
down it off
the front
cover of the lint filter
.
figure2
3.Sweep the rubbish in the lint filter.
4.Put
the back of the lint filter into
the front
cover .
5.Put
the lint filter into
filter
cover,
and make it tight .
6.Make sure the lint filter well installed,
or
it can
influence your use.