9- Troubleshooting
EN
24
9.2 Troubleshooting with display code
Problem
Cause
Solution
E1
•
Drainage error, water is not fully drained
within 6 minutes
•
•
Check drain hose installation.
E2
•
Lock-error.
•
Shut the door properly.
E4
•
Water level not reached after 8 minutes.
•
Drain hose is self-syphoning..
•
Make sure that tap is fully opened and water
pressure is normal.
•
Check drain hose installation.
E8
•
Water protective level-error..
•
Contact the After sales service
of a problem please check all shown possibilities and follow below instructions before you
contact an after sales service. See CUSTOMER SERVICE.
WARNING!
▶
Before maintenance, deactivate the appliance and disconnect the mains plug from
the mains socket.
▶
improper repairs can cause considerable consequential damages.
▶
A damaged power cable should only be replaced by the manufacturer, its service
9.1 Information codes
Following codes are displayed only for information referring to the washing cycle. No
measures must be performed.
Code
Message
1
:
25
The remaining wash cycle time will be 1 hour and 25 minutes
6 30
The remaining wash cycle time including chosen end-time delay will be 6 hours and 30 min-
utes
Auto
Automatic load detection is working.
End
cLo1-
Function child lock is activated
LocI-
Door is closed because of high water level, high water temperature or spinning cy-
cle.
bEEP OFF
The buzzer is deactivated
bEEP ON
The buzzer is activated
SPEEd
uP
Function “Speed up” is activated
:
Содержание HWD90-BP14636
Страница 1: ...EN User manual Washer dryer HWD90 BP14636 HWD100 BP14636 ...
Страница 34: ......
Страница 35: ...Gebrauchsanleitung Waschmaschine DE HWD90 BP14636 HWD100 BP14636 Bedienungsanleitung Waschtrockner ...
Страница 68: ...0020506943JU ...