Haier HWD-C1200TXVE-U, Руководство по обслуживанию

Страница: 26 / 29

Failure:no draining
Troubleshooting:
Y
Adjust the height of drain pipe to
80-100 cm
24
N
Is the height of drain pipe too high?
N
N
N
N
Cut off and check if the connection between
drain pump and PCB is open
Turn on power and choose spin program to
start.Measure if import voltage of drain
pump is 220-240V
Check if hose connecting cylinder to pump
is bent or jammed
Turn on and choose spin program to
start.Measure if export voltage of PCB to
drain pump is 220
Turn filter anticlockwise ˈ open and check if
Clean and tighten filter clockwise.
Y
Y
Arrange hose and clean
Replace drain pump
Y
Y
Replace the wire .
Replace
Power
driver
PCB
N
Failure :abnormal noise and vibration
Troubleshooting:
Y
Y
Y
N
Y
N
Y
220-240V
Y
N
Is there foreign material in the washer ?
N
N
N
Remove belt and turn belt pulley by
t
re the screws of counterweight and
Is belt loose or worn?
Turn on power and set spin program,then
start
ˈ
check if there is different noise from
motor
Y
Is washer in balance?
Is the pack screws dismantled?
Dismantle the screws
Clean
Adjust adjustable feet
Replace it
Fasten them
Dismantle triangle and check
Replace motor
SERVICE MANUL
HWD-C1200TXVE-U
Haier Washing Machine