Haier HW80-B14876 Скачать руководство пользователя страница 25 | Manualshive

Страница: 25 / 32

Haier HW80-B14876 Скачать руководство пользователя страница 25

8-Troubleshooting

25

Unsatisfactory
washing result.

with selec

●

ted programme.

D

●

etergent quantitiy was not suf

in the drum.

Select another programme

Choose the detergent acc.to

Reduce loading.
Loose the laundry.

Washing powder
residues are on the
laundry.

remain as white spots on the
laundry.

Perform extra rinse.

dry laundry.
Choose an other detergent.

Laundry has grey
patches.

or ointments

Pretreat the laundry with a
special cleaner.

8.4 In case of power outage

The current programme and its setting will be saved.
When power supply is restored, previous operation

will be resumed.
If  a  power  failure  cuts  an  operating  wash  programme,
door opening is mechanically blocked. To get out any
laundry  water  level  should  not  be  seen  in  the  glassy
porthole  of  the  door.  Not till then  pull  lever  (A)  beneath

servi

●

ce flap (Fig. 8-1) until door is unlocked by a gentle

click. Afterwards refix all parts

ficient.

to manufacturer specifications.

If error codes are still displayed after these measures, switch off the appliance, disconnect
the power supply and contact the customer service.

«
...
23
24
25
26
27
...
»

Содержание HW80-B14876

































Отзывы:

Нет отзывов