Haier HW80-B14876, Руководство пользователя, Страница: 10 / 32

3-Control panel
10
Note: Liquid detergent
If using liquid detergent, it is not recommended to activate the end time delay.
3.6.1 Function “Dela
●
y”
P
●
ress this button (Fig. 3-8) to start the programme
with
●
a delay. End time delay could be increased in a st-
means
●
end of programme cycle will be in 6 hours
and 30 minutes. Press “Start/Pause” button to activate
the time delay.
The time delay must be longer than the programme run
time. Otherwise the programme will start immediately.
For deactivating the time delay; rotate programme se
lec
●
tor.
3.6 Function buttons
The function buttons (Fig. 3-7) enable additional op-
tions in the selected programme before programme
start. The related indicators are displayed.
all options are disabled.
If a button has multiple options, the desired option can
be selected by pressing the button sequentially.
To delete the setting or cancel the setting process,
press the function button until the desired LED lights
Not all functions are available for all programmes (see
“Programmes”).
Note: Factory settings
settings. If there is no special requirement, default settings are recommended.
By switching off the appliance or a programme running
or -in case of only one option- the LED switches off
ep of 30 minutes from 0.5-24h. For example, display off
To get best results in each programme we have well defined specific default
3.6.2 Function “I-time”
Press the“I-time” button (Fig. 3-9) to select or cancel
“I-time” function,washing time can be increased or
reduced by pressing the button sequentially.
Not all functions are available for all programmes
(see “Programmes”).
Delay I-time Temp. Speed Rinse Water level
Delay
I-time
-