Haier HW80-1279, Руководство пользователя, Страница: 18 / 110

17
Water inlet valve and inlet valve fil ter
To prevent blockage to the water supply by ingress of foreign
substances, clean the water inlet valve and inlet valve
fi lter regularly.
Moving the machine
If the machine is to be moved to a distant lo on, replace the transpo on bolts removed before
in on to prevent damage as shown below.
Remove the back cover.
Remove the blanking plugs.
Insert the synthe c stabilizers and the transpo on bolts.
Tighten the bolts with a spanner.
Replace the back cover.
Long periods of disuse
If the washing machine is l idle for a long period, pull out the electrical plug and turn o ff t he water
supply. Open the washer door to prevent form on of moisture and odors. Let the door open while
not used.
Display Codes
Display Codes and Special func ons
Codes Causes Solu ons
Err1 Door is not properly shut. Shut the door properly, and then press the
Start/Pause bu on.
Err2 Drainage error, water not emp within
6 minutes.
Clean the fi lter and check the drain hose
for blockage. If error s l exists, please
contact the maintenance personnel.
Err3 Temperature sensor not properly
connected or damaged. Contact the maintenance personnel.
Err4 Heater error (Appears at the end of a
cycle). Contact the maintenance personnel.
Err5 Water level not met in 8 minutes.
The height of the drain hose is below 80
cm.
The drain hose is in water. Make sure that tap is turned on, and water
pressure is normal.
If problem s ll exists, please contact the
maintenance personnel.
Install drain hose within 80-100 cm of
height.
Make sure the drain hose is not in water.
Maintenance