Haier HW80-1279, Руководство пользователя, Страница: 10 / 110

9
Extra Rinse
Start/Pause
Button
Press this button, the washing machine will perform additional rinses.Press
the button once to select one additional rinse. The display will show"P-1".
Press the button repeatedly and the screen will display "P-2''or "P-3'',
indicating two or three additional selected rinses. The "extra rinse light" is
activated and flashes during the performance. "P-1/2/3" is displayed
alternating with the remaining time. The light turns off and the display
disappears when the extra rinse ends.
When the washing machine is connected to the power socket and a
program is selected, lightly touch this button to start operation. During
a wash cycle, touch it lightly ,operation will stop and the digits on the
screen start blinking. Touch it again to resume operation. To cancel a wash
program during a wash cycle, touch this button, when the digits on the
screen start blinking, press the Power switch, the program will be cancelled.
Before a washing program,select this program to set the washing load
(1/2Full),the washing machine will automatically adjust the water
consumption and washing time.
Information as remaining wash time and error messages will be shown here.
Touch this button lightly, the washing machine will start operation after a
period of time and the corresponding indicator will go on. The range is 0.5-24
hours; each touch of this button increases a half hour. After the button is set,
press the Start/Pause button to start countdown of the set time (the time is
displayed on the screen until the program ends).
After a wash program is started the display will go on and the
remaining wash time decreases. As the water pressure and
temperature may differ, the remaining time may be adjusted
accordingly. When the laundry is not balanced during spinning, the
time may be automatically prolonged.
Select this function when programe 1-9 is selected.
The delay time must be longer than the program time otherwise
the washing machine will start the wash program directly.
To cancel audible alarm
Alarm sound can be cancelled if it is required (not recommended)
Switch on the washing machine and turn the program knob to spin cycle, then press the
"Delay" and "Extra rinse" button, hold on for 3 seconds.
The message "BEEP OFF” will be displayed on the screen, indicating that the alarm sound has
been cancelled.
To reinstate audible alarm
Switch on the washing machine and turn the program knob to spin cycle, then press the
"Delay" and "Extra rinse" button, hold on for 3 seconds.The "BEEP ON" message will be
displayed on the screen, indicating that the alarm sound has been reinstated.
Functio ns
7
8
ECO
9
LED Display 10
Delay 11