Haier HW150-BP14986ES9, Руководство пользователя, Страница: 30 / 64

EN
9-Installation
30
9.8 Electrical Connection
Before each connection check if:
▶
power supply, socket and fusing are appropriate to
the rating plate.
▶
the power socket is earthed and no multi-plug or
extension are used.
▶
the power plug and socket are strictly according.
Put the plug into the socket (Fig. 9-14).
WARNING!
▶
Ensure always that all connections (power supply, drain and fresh water hose) are fi , m r
dry and leack free!
▶
Take care these parts are never to be crushed, kinked, or twisted .
▶
If the supply cord is damaged, it must be replaced by the service agent in order to
avoid a hazard.
9-14
9.7 Fresh Water Connection
Make sure that the gaskets are inserted.
Connect the water inlet hose with the angled
end to the appliance (Fig. 9-12 ) . Tighten the
screw joint by hand.
The other end connect to a water tap with a
3/4“ thread (Fig. 9-13).
9-13 9-12
1.
2.
小
WARNING!
� Use only the supplied hose set for the connection
�Never reuse old hose sets!
� Only connect to cold water supply.
�Before connection, check whether the water is clean and clear.
Note: Hygiene
After each installation or long periods of disuse, before first use and for regular main-
tenance run programme Drum Cl ean with no load and small amount of detergent in
washing agent compartment (2) or with special machine cleaner to remove possibly
corruptive residues.