Haier HW150-BP14986ES9, Руководство пользователя, Страница: 10 / 64

3-Control panel
EN
10
3-9
3-10
Note: Factory settings
To get best results in each programme Haier has well de fi ned speci fi c default settings.
If there is no special requirement default settings are recommended.
Note: Nightwash
Max. speed can be setted is 800 rpm as you add Nightwash to a programme. Easy Iron
is the default setting of Nightwash. Nightwash will be cancelled if Easy Iron is cancelled.
3.5.5-Function button “ “
This function (Fig. 3-11) intensi fi es di ff erent washing
time.The “i-time” can’t operate in single washing
function, washing spin function and easy self- c leaning.
3.5.3
-
“Steam“ button
This function (Fig. 3-9) is available on cycles of Cot-
ton, synthetic, Babycare, Mix. When it is selected,
temperature function turns to be unselectable. Icon
will be lighted when above cycles are selected.
3.5.4-“Function“ button
Press this button (Fig.3-10) to choose special features.
The symbols are explained below.
3.5.1-Function button “Delay“
Press this button (Fig. 3-7) to start the programme with a
delay. End time delay could be increased in steps of 30
minutes from 0,5-24h. For example displa y off 6:30 means
end of programme cycle will be in 6 hours and 30 minutes.
Touch “Start/Pause” button to activate the time delay. It is
not applicable to programme “ Spin “ and " R efresh" .
3.5.2-“Nightwash“ button
Press this button (Fig. 3-8) to select Nightwash function to
achieve better performance at night. All the acoustic signal
will be turned o ff , except for failure signal. A 12 hour
dispersing of laundry load is added to the programme as 1
minute left.
3-7
3-8
8
3-11
Easy Iron Allergen
Intense
Delay
Nightwash
Steam
Function