Warning:
To avoid electric shock always unplug your
wine & beverage center before cleaning. Ignoring
this warning may result in death or injury.
Caution:
Before using cleaning products, always read and
follow manufacturer’s instructions and warnings to
avoid personal injury or product damage.
General:
• Prepare a cleaning solution of 3-4 tablespoons of
baking soda mixed with warm water. Use sponge or
soft cloth, dampened with the cleaning solution, to
wipe down your wine & beverage center.
• Rinse with clean warm water and dry with a
soft cloth.
• Do not use harsh chemicals, abrasives, ammonia,
chlorine bleach,concentrated detergents, solvents or
metal scouring pads. SOME of these chemicals may
dissolve, damage and/or discolor your wine &
beverage center.
• Clean door gaskets every three months according to
general instructions. Gaskets must be kept clean and
pliable to assure a proper seal.
• Petroleum jelly applied lightly on the hinge side of
gaskets will keep the gasket pliable and ensure a
good seal.
Cleaning and Maintenance
Door Gaskets:
9
• Occasionally there may be power interruptions due to thunderstorms
or other causes. Remove the power cord from AC outlet when a
power outage occurs. When power has been restored, replug power
cord to AC outlet.
• For long vacations or absences, unplug the wine & beverage center
and clean the door gaskets according to “General cleaning” section.
Leave doors open, so air can circulate inside.
• When moving always move the wine & beverage center vertically. Do
not move with the unit lying down, as possible damage to the sealed
system could occur.
Note:
After moving, wait for 24 hours before plugging in the
wine & beverage center.
Power Interruptions
Vacation and Moving Care
English
English
ProPer wine & beverage center
care and cleaning
