English
Instruction for use Refridgerator
3
Warning!
Any refrigerant spilling out can injure your eyes.
In the event of eye contact with the refrigerant, wash your
eyes instantiy under plenty of running water and
call/consult a doctor (an eye specialist) immediately..
The appliance, according to its climate category, is
meant for use at certain room temperatures.
These temperatures should not be exceeded! The
climate category for your particular appliance is marked
on the rating plate. The categories are:
name of climate
category
suitable
room temperatures
SN
+ 10°C bis + 32°C
N
+ 16°C bis + 32°C
ST
+ 18°C bis + 38°C
T
+ 18°C bis + 43°C
4 The rating plate
The rating plate with the technical data is affixed at the
side on the inner wall or on the back of the appliance.
Take a note of the technical data
Copy here below the technical data from the rating plate
so that it is easily accessible without having to move the
appliance
Model- / Type T°. .....................................
Gross capacity............................... Liter
Net capacity
.................... Liter
Operating voltage ........................ V / 50 Hz
Maximum absorbed powe (W) ......Watt
Safety fuse (A) ......................... Amp
Power consumption ..................... kWh/24h
Freezing capacity ........................ kg/24h
5
Connecting up your appliance to the mains
Your appliance must be connected only to a grounded
Power socket which complies with relevant standards
And has been installed by an authorised specislist.
Before you plug in your appliance to the power socket,
make absolutely sure that the voltage (V) and the safety
fuse (A) for the main fuse box stated on the appliance's
rating plate match your electrical supply.
If these do not match, notify the nearest service
department or your dealer immediately.
The appliance must not be connected up to an inverse
rectifier (e.g. solar panels).
Ŷ
The appliance is not to be connected to an inverter
e.g. solar power panels.
Ŷ
The appliance is not to be connected via an extension
cable.
6 Using your appliance
a) Switching on / off and Selecting the Temperature
Temperature dial (Thermostat)
The temperature dial switches the appliance on and off
and sets the cooling temperature
b) Switching on the appliance:
Turn the temperature controller clockwise. The appliance
is switched on. ( Turn the controller only as far as the
stop, otherwise it will be damaged)
Ŷ
The interior light is switched on (not fitted to all
models)
Ŷ
The compressor runs unril the set temperature is
reached inside the appliance.
Ŷ
The internal temperature is shown in the display (not
installed in all appliance models).
c) Temperature settings:
Turn dial left to
lowest setting = slight cooling
Turn dial right to
highest setting = lowest temperature
The temperature must be set according to:
Ŷ
he appliance's room temperature
Ŷ
quantity of stored food
Ŷ
how often the appliance is opened
We recommend a medium setting. You will soon learn,
through observation, which is the most suitable setting
for your requirements.
A correct temperature setting is important for storing
food. Food is spoiled very quickly by micro-organisms
and this can be hindered or delayed by a correct storage
temperature. The temperature influences the rate of
growth of micro-organisms. These processes are slowed
down by a falling temperature.
This is why we recommend a middle setting of the
temperature controller (ca. 5
ć
or lower)
d) Switching off:
Turn the controller counterclockwise
as far as the stop.
Ŷ
Interior light in fridge compartment goes out
Ŷ
Compressor is switched off
Ŷ
The temperature display (where fitted) goes out
7 Supercooling function
(not fitted to all models):
The supercooling function enables the fridge
compartment to be cooled very fast to ca. 2
ć
.
You are advised to press the supercool button when you
wish to cool large amounts of freshly stored produce or
beverages very fast.
Ŷ
Press the supercool button.
The control lamp lights. The appliance now runs at its
maximum cooling capacity and the temperature falls:
Switch off the supercool button after ca. 4 to 6 hours. On
some appliance models the supercooling function cuts
out automatically.
Ŷ
Press the supercool button so that the control lamp
(where fitted) goes out.
The appliance now operates at its normal cooling
capacity.
8 Interior light
(not fitted to all models)
A switch is installed on all appliances fitted with a light.
When the fridge is switched on via the temperature