Door removal
Removing the door
If your house door is too narrow, remove the refrigerator door and carry the
refrigerator in narrow side first.
Remove the toe moulding, and then
release the water coupler.
Slide the toe moulding up to remove it, and then release
the water coupler while pressing on area (1) as shown in
the illustration.
Water coupler
Toe moulding
Remove the freezer compartment door.
1)
Unscrew the hinge covers. Disconnect all
wires except for the grounding wire.
2)
Remove the screws from the upper hinge
following the direction as indicated by Arrow (1).
Then remove the upper hinge following the
direction as indicated by Arrow (2).
3) Lift the freezer compartment door to remove
it. Next, lift the door enough to be able fully
pull out the water line.
Hinge cover
Wires
Upper
(hinge)
Grounding wire
Upper hinge
Screw
Lift
Lift until water
line can be fully
removed.
Lower
hinge
10
Defrosting · Cleaning
Defrosting
Cleaning
The appliance defrosts automatically.
Clean the refrigerator regularly to prevent odour build-up.
For safety reasons, first unplug the power cord.
Clean the appliance using a soft rag or sponge and
lukewarm water, to which you may add a little bit of a
neutral dishwashing liquid.
Dry off surface water with a rag.
Caution: Do not use pointed objects, metal brushes or the following chemical
solvents:
abrasive cleansers, varnish, amyl acetate, hot water, acid, alkaline cleaners, etc.
Caution: Do not pour water onto the appliance.
Use a rag or sponge to clean and dry the controls and lights.
Be sure to clean the door seal regularly.
31
