CARE AND mAINTENANCE
Filter system
The filter system consists of a coarse filter, a flat (main filter) and a micro
filter (fine filter).
1.
main filter
: Food and soil particles
trapped by this filter are pulverized
by a special jet on the spray arm and
washed down the drain.
2.
Fine filter
: This filter holds soil and
food residue in the sump area and
prevents it from being deposited on the
dishes during wash cycle.
3.
Coarse filter
: Larger items, such as those that could block the drain,
are trapped in the coarse filter. To remove the items caught by the filter,
gently squeeze the tap on the top of this filter and lift out.
The filter efficiently removes food particles from the wash water,
allowing it to be recycled.
For best performance and results, the filter assembly must be cleaned
regularly. For this reason, it is a good idea to remove
the larger food particles trapping in the filter after each
wash cycle by rinsing the filter assembly under running
water. To clean the coarse filter and the fine filter, use
a soft cleaning brush. Reassemble the filter parts as
shown in the diagram and reinsert the entire assembly
in the dishwasher, positioning in its seat and pressing
downward.
To remove the filter assembly, grab the handle of the
fine filter, rotate it counter clockwise then pull in an upward direction.
Step 1: rotate the fine filter counter clockwise;
Step 2: lift fine filter up;
Step 3: lift main filter up
NOTE:
Reverse this procedure to reinstall the filter.
English
19
Using The Delay Feature
The start of the HDC2406 can be delayed between 1 and 24 hours in
one hour increments. To utilize this feature:
1. Press “ON/OFF” button to “on” position
2. Press “PROGRAM” button
3. Press “DELAY” button once for each hour of delay (i.e. press 3 times to
delay start 3 hours)
To cancel the delay feature:
1. Press “ON/OFF” button to “off” position.