Haier HDBL655AFS, Руководство по установке, Страница: 16 / 36

14
INSTALL THE DRAIN HOSE
IMPORTANT:
•
Always use a new drain hose when installing a new replacement dishwasher.
•
Keep the drain hose away from the floor and the edge of the hole where it passes
through the cabinet to minimize the noise caused by vibration when using the
dishwasher.
1. Connect drain hose to waste tee or garbage disposal using one of the following
methods.
•
Option 1 – Garbage Disposal - With Air Gap
•
Option 2 – No Garbage Disposal- With Air Gap
•
Option 3 – Garbage Disposal - No Air Gap*
•
Option 4 – No Garbage Disposal - No Air Gap*
*an air gap is recommended
Option 1 – (Garbage Disposal - With Air Gap):
1. Remove the garbage disposal knockout plug. Cut end of drain hose if needed (do
not cut ribbed section).
2. Attach drain hose to air gap with screw-type clamp. If the drain hose was cut, use
a 11/2" to 2" (3.8 to 5 cm) screw-type clamp*.
3. Use a rubber hose connector* with spring or screw type clamps* to connect air
gap to garbage disposal inlet.
This connection must be before the drain trap and at least 20" (50.8 cm) above the
floor where dishwasher will be installed.
a
b
f
c
d
e
g
h
a
Drain Hose - Cut Here if
Needed
b
Screw-Type Clamps
c
Air Gap
d
Screw-Type Clamp
e
Drain Hose
f
Rubber Hose Connector
g
Garbage Disposal Inlet
h
Drain Trap
*Parts available from local plumbing supply store.