Haier HD80-A3939E-S, Руководство пользователя

Страница: 62 / 140

62

The tumble dryer is not to be
used if industrial chemicals
have been used for cleaning.

Lint and fluff must not be allowed
to collect on the floor around the
outside of the machine.

Always remove the plug before
cleaning the appliance.

The drum inside may be very
hot. Always allow the dryer to
complete the cool down period
before removing the laundry.

The final part of a tumble dryer
cycle occurs without heat (cool
down cycle) to ensure that the
items are left at a temperature
that ensures that the items will
not be damaged.
WARNING
During transport ensure that
the dryer is in an upright
position, if it's necessary
you can only flip in the side
shown.
If the product is in different
side, wait at least 4 hours
before switching on so that
the oil can flow back into the
compressor. Failure to do
this could result in damage
to the compressor.
WARNING
Never stop a tumble dryer
before the end of the drying
cycle unless all items are
quickly removed and spread
out so that the heat is
dissipated.
WARNING
Where the hot surface
symbol is located the
temperature rise during
operation of the tumble
dryer may be in excess of 60
degrees C.
WARNING
Do not use the product if the
fluff filter is not in position or
is damaged; fluff could be
ignited.