Haier HD80-26A, Руководство пользователя

Страница: 6 / 48

6 | English
UNPACKING 1 2
Remove all packaging material including
the polystyrene base. All packaging
material should be recycled.
1 Cut the strips.
2 Lift the cover upwards.
3 Remove the protective parts.
4 Remove the base.
Ensure that any plastic wrappings,
bags, etc are kept out of the reach of
babies and young children. Danger of
suffocation.
3 4
INSTALLATION 1 2
1 Check the dryer does not rock or
wobble.Adjust the four feet to level the
dryer before operation.
2 Make sure the socket meets the
requirements and connect it to an earthed socket outlet.
Do not install in a room which is susceptible to frost. Water may cause damage
once it starts to freeze.
Transport the dryer in a vertical upright position.
There may be residual water in the dryer.
This can leak out if the dryer is at an angle.
TECHNICAL DATA
Power 220 - 240 V~ / 50 Hz
Nominal load (kg) 8
Max. power (W) 800
Fuse (A) min. 10
Ambient temperature (°C) 5 - 35
Dimensions (H x D x W mm) 845 x 650 x 595
Net weight (kg) approx. 50,5
Water protection level IPX4
Warning : Following transportation and
installation, you MUST leave the dryer to
stand for two hours before use.
Fluorinated greenhouse gas HFC-134a
Volume 0.63kg
GWP
Tonne(s) of equivalent
1430
0.9