Haier HD80-26A, Руководство пользователя

Страница: 21 / 48

TROUBLESHOOTING
Before contacting the customer service, please check the following
circumstances:
PROBLEM CAUSES SOLUTION
Tumble dryer
fails to operate. – Poor connection to the
power supply.
– Power failure.
– No drying program is set.
– Device has not been
switched on.
– The water tank is full.
– The door is not closed
properly.
Check connection to the power
supply.
Check the power supply.
Set a drying program.
Switch the device on.
Empty the water tank.
Close the door properly.
Tumble dryer
fails to operate
and the display
shows END. – The laundry has reached
by
the program.
– There is no laundry in the
drum.
Check if the program setting is
appropriate.
Check if there is laundry in the
drum.
Drying time is
too long and
the results are
not satisfac-
tory. – The program setting is not
correct.
–
– The evaporator is blocked.
– The tumble dryer is
overloaded.
– The laundry is too wet.
– The vent duct is blocked.
Make sure the program is set
correctly.
Clean the evaporator.
Reduce the amount of laundry.
Spin the laundry properly
before drying.
Check the vent duct and
unblock it.
Remaining time
on the display
stops or skips. The remaining time will be
adjusted continuously based
upon the following factors:
– Type of laundy.
– Loaded amount.
– Moisture degree of the
laundry.
– Ambient temperature.
The automatic adjustment is a
normal operation.
English | 21