Haier HCI604TG3 Скачать руководство пользователя страница 2

Страница: 2 / 57

INSTALLATION

WARNING: Electrical Shock Hazard

• Disconnect the appliance from the mains electricity supply before carrying out

any work or maintenance on it.

• Connection to a good earth wiring system is essential and mandatory.
• Alterations to the domestic wiring system must only be made by a qualified

electrician.

• Failure to follow this advice may result in electrical shock or death.

WARNING:Cut Hazard

• Take care - panel edges are sharp.
• Failure to use caution could result in injury or cuts.

Important Safety Instructions

• Read these instructions carefully before installing or using this appliance.
• No combustible material or products should be placed on this appliance at any

time.

• Please make this information available to the person responsible for installing

the appliance as it could reduce your installation costs.

• In order to avoid a hazard, this appliance must be installed according to these

instructions for installation.

• This appliance is to be properly installed and earthed only by a suitably qualified

person.

• This appliance should be connected to a circuit which incorporates an isolating

switch providing full disconnection from the power supply.

• Failure to install the appliance correctly could invalidate any warranty or liability

claims.

OPERATION AND MAINTENANCE

WARNING:Electrical Shock Hazard

• Do not cook on a broken or cracked cooktop. If the cooktop surface should break

or crack, switch the appliance off immediately at the mains power supply (wall

Содержание HCI604TG3


























































Результаты поиска

Содержание HCI604TG3

Отзывы:

Похожие инструкции для HCI604TG3

Бренды по названию

Популярные бренды

Haier HCI604TG3, Инструкция по эксплуатации

Результаты поиска

Содержание HCI604TG3

Отзывы:

Похожие инструкции для HCI604TG3

Бренды по названию

Популярные бренды