Haier HAIH6IESCE Скачать руководство пользователя страница 51

Страница: 51 / 156

To change the Power Limitation setting

- press the

Display (2) of the left front area (FL)

- then scroll on the

Selection bar (3)

, to select the new setting

- to save the choice made, press the

ON/OFF key (1),

for 2 seconds; a prolonged audible signal will be emitted to
confirm the successful setting

Bridge Zones

Thanks to the Bridge function, the cooking zones are able to
work in a combined manner, creating a single zone with the
same power level. This function allows evenly distributed
cooking with large-sized pots and pans.
The front “

Master

” cooking zone can be used in combination

with the corresponding “

Secondary

” cooking zone at the

back

(to check which zones are equipped with this function, see the
illustrated part of this manual).

To activate the Bridge Function:
- simultaneously select the two cooking zones you want
to use

- the

Display (2)

of the

"Secondary”

cooking zone shows the

symbol "

- using the

Selection bar (3), it

will be possible to set

the

Level (Power) of exercise,

which will be shown in the

Display (2)

of the "

Master

” cooking zone

- to deactivate the

Bridge Function

simply repeat the same

activation procedure

Note:

the

Cooking Timer Zone

, activated during the Bridge

Function, causes the automatic shut-down of both cooking
zones, as in this case they are considered a single combined
area.

USING THE EXTRACTOR FAN

Switch-on

Press (touch) briefly

ON/OFF (1)

hob/extractor: the

symbol

lights up;

continuing to press

, all the available functions will become

visible for a few moments, e

, after which

only the main

ones will remain active; the others can be used, and will
be activated, subsequently, during use of the device.

IMPORTANT:
all the available functions will be illuminated with light
intensity, which will become more intense only when they
are activated.

Press

again to turn off

Note: This function has priority over the others.

• Switching the extractor system off: Open the Flap

touch

the

selection Zone (12)

to activate the extractor system.

Note:

The extractor zone is fitted with a mechanical rotating

FLAP

. The

FLAP

must be opened before switching on the

hood to activate the extractor system. The hood has a sensor
which when the extractor is on stops the motor automatically if
the

FLAP

is closed. Extraction only starts again when the

FLAP

is reopened.

Extraction speed (power):

The extractor is equipped with 3 levels of extraction speed
(power)
Touch and slide your fingers along the

Selection bar (3):

to the right to increase the level of power;
to the left to decrease the level of power.

The power level set will be displayed in the
Selection/Display area (12)

Power Booster

The product has 2 additional power levels (above level 3)
7.

Power Booster 1

: timed for 15 min.

Power Booster 2

: timed for 5 min.

after which the power returns to the previously set level.

Touch and slide with the fingers along the

Selection bar (3)

(over level 3) and activate the Power Booster 1
The Power Booster level 1 is indicated in the Selection /
Display area (12)

with the number "4" flashing

Touch and slide with the fingers along the

Selection bar (3)

(over level 3) and activate the Power Booster 2
The Power Booster level 2 is indicated in the Selection /
Display area (12)

with the symbol” ” flashing

Automatic operation

The hood will turn on at the most suitable speed, adapting the
extraction capacity to the maximum cooking level used in the
cooking zone.
When the cooking zones are switched off, the hood adapts its
extraction speed, decreasing it gradually, to eliminate residual
vapours and odours.

To activate this function:

Press

(14)

Repeat the operation to deactivate

Note:

if during automatic operation are selected from the

Selection bar (3)

the

speeds from 1 to 3

, the automatic

operation is interrupted;
if, instead, the

Power Boosters

are selected, automatic