manualshive.com logo in svg

Haier GE UltraFresh GFD55ESSN, Техническое обслуживание руководство, Страница: 53 / 59

Поделиться
Скачать
Haier GE UltraFresh GFD55ESSN Скачать руководство пользователя страница 53

– 53 –

  Service Mode Tests

Test 

No.

Test Name

Description

0

All LED’s On

All LED's on the display will blink including "88" on the Seven Segment 

Display (SSD) at a rate of 1Hz

1

Fault Codes

• 

Pressing Start pad will blink the first fault code.

•  Press the Start button to advance to the next fault.
• 

At end of list, OR if no fault codes are present, unit will flash "- -".

•  Pressing Start again at the end of the list will wrap back around to display 

the first fault again.

•  Rotate the cycle knob to end the current test and advance to the next test.

2

Personality ID

•  Pressing Start/Pause will start the test.
•  Flash the set personality after pressing Start.
•  Use Seven Segment Display (SSD) to show personality.
•  Rotate the cycle knob to end the current test and advance to the next test.

3

MC Software 

Version 

(Critical)

•  Press Start to toggle through software version number as follows 

(Example v01.23).

•  First Press: "01" on Seven Segment Display (SSD).

Major Version (Pause LED will be ON).

•  Second Press: "23" on Seven Segment Display (SSD).

Minor Version (Sensing LED will be ON).

•  Rotate the cycle knob to end the current test and advance to the next test.

4

MC Application 

Version (Non-

Critical)

•  Press Start to toggle through software version number as follows 

(Example v01.23).

•  First Press: "01" on Seven Segment Display (SSD).

Major Version (Pause LED will be ON).

•  Second Press: "23" on Seven Segment Display (SSD).

Minor Version (Sensing LED will be ON).

•  Rotate the cycle knob to end the current test and advance to the next test.

5

MC Parametric 

Version (Non-

Critical)

•  Press Start to toggle through software version number as follows 

(Example v01.23).

•  First Press: "01" on Seven Segment Display (SSD).

Major Version (Pause LED will be ON).

•  Second Press: "23" on Seven Segment Display (SSD).

Minor Version (Sensing LED will be ON).

•  Rotate the cycle knob to end the current test and advance to the next test.

6

User Interface 

Software 

Version 

(Critical)

•  Press Start to toggle through software version number as follows 

(Example v01.23).

•  First Press: "01" on Seven Segment Display (SSD).

Major Version (Pause LED will be ON).

•  Second Press: "23" on Seven Segment Display (SSD).

Minor Version (Sensing LED will be ON).

•  Rotate the cycle knob to end the current test and advance to the next test.

7

User Interface 

Software 

Version (Non-

Critical)

•  Press Start to toggle through software version number as follows 

(Example v01.23).

•  First Press: "01" on Seven Segment Display (SSD).

Major Version (Pause LED will be ON).

•  Second Press: "23" on Seven Segment Display (SSD).

Minor Version (Sensing LED will be ON).

•  Rotate the cycle knob to end the current test and advance to the next test.

(

Continued next page

)

Содержание GE UltraFresh GFD55ESSN




























































Отзывы:

Нет отзывов