Haier DW12-PFE8 series, Руководство по эксплуатации

Страница: 9 / 240

EN
Drain hose connection
Insert the drain hose into a drain pipe with a minimum diameter of 4cm, or let it run
into the sink, making sure to avoid bending or crimping it. If necessary, fit a syphon
trap (U-bend) with a connecting piece for the electrical drain hose (fig.C). The free
end of the hose must be at a height between 40 and 100 cm and must not be
immersed in water.
fig.C
Attention:
The connecting piece for syphon trap (U-bend) must be
securely fastened to the wall to prevent the drain hose
from moving and allowing water to spill outside the drain.
Electrical Connection
After making sure that the voltage and frequency values for the current in the home
correspond to those on the rating plate (located on the stainless steel inner door
of the appliance) and that the electrical system is correct for the maximum voltage
on the rating plate, insert the plug into an electrical socket which is earthed properly
(the earthing of the appliance is a safety requirement mandated by law).
Caution:
The dishwasher plug must be accessible even when the
appliance is installed as a built-in unit so that maintenance
can be done safely.
min 40 cm
max 100 cm
2m max
8