Haier DW-86L579BP, Руководство по эксплуатации

Страница: 19 / 26

32
[Sent box]
You can click "Sent box" to view the message that has been sent .
•Message box
[Inbox]
You can click "Inbox" to view the messages that have been received. When a message has been
read, its fonts become gray.
17
•CL1: 0 is the default value for cancelled IC card; it is adjustable from 0 to 1;
Select CL1 to access the parameter list. Press the "Set" key and 000 fl ickers to demand you to
enter the password. Then press the "Set" key again to execute the order when CL fl ickers 3 times
and then the buzzer rings once. Here cancellation is done. If the password entered is wrong three
time in succession, exit and lock it and re-display the temperature inside the box.
7.IC Card Registration Mode
1) Unlock the display screen. Now the lock indicator lamp is extinguished. Then press the "
" button for 5s to show "000", the input value of IC card registration password in the chamber
temperature display area. Press the "
" or " " button to change the password input value to
"008". Press the "Set" button to call up the IC card registration screen to display the current number
of IC cards. If the current number of IC cards is 0, the value of "--00" is shown on the display and
now it is possible to register IC cards;
2) When swiping each new IC card, the buzzer will sound once and the number of IC cards will be
increased by 1, e.g., "--01";
In case of swiping a registered IC card, the buzzer will sound once, however the number of IC
cards will not be increased by 1;
3) Up to 99 IC cards can be registered;
4) When showing the current number of IC cards, press the "
" button to return to the upper
level, i.e., the temperature setting parameter mode, or if there is no button pressing or card swiping
for 20s, the function will be blocked and the screen will return to display the chamber temperature;
5) The electromagnetic lock can not be released in the state of registration;
8.USB-based Data Export
Plug in a USB fl ash disk to enable automatic export of the machine's temperature, alarm and event
records. Once the data is exported, the decimal point at the bottom right corner of the rightmost
digital tube which is used to display the temperature starts to fl ash. When the data exporting
process is fi nished, the decimal point remains normally ON without fl ashing. Remove the USB fl ash
disk. Now the decimal point goes out.
•The system memory can save data for 10 years.
•When export data to USB disk, please use an USB disk with a fi le format of FAT32.
•If the FAT32 USB disk cannot export data, please backup the fi le of the USB disk fi rst
and then format the USB disk or try another brand FAT32 USB disk.
Caution