8
•
An ULT freezer is usually sensitive to its operating environment. If a unit is not
installed in the conditions mentioned above, it cannot operate reliably. Please improve
the environmental conditions before using the equipment.
•
It is prohibited to use the unit in an outdoor place. After the unit is rained on, there is
a danger of electric shock.
•
Ambient temperature:10
℃
to 32
℃
.The ideal temperature is 18
℃
to 25
℃
. If necessary, use an air-
conditioning system to achieve the required ambient condition.
•
Environment humidity: less than 57%RH.
•
The intended location should be low in dust count.
•
The intended location should be vibration and shock free.
•
The highest elevation the unit can work safely: 2.000 m above sea level.
•
Input voltage: within Rated Voltage ±10 % .
For the equipment to achieve optimal operating conditions, an intended installation location should
satisfy the following requirements.
•
Do not install the unit in a confi ned place. The doorway should be large enough for the unit to
freely enter or exit the room if necessary. This is to allow the unit to be repaired easily and timely
to avoid damage to property
•
The location for installation should be fl at and fi rm.
•
There should be good ventilation and no direct sunlight.
•
The freezer unit cannot share the same power socket with other equipment. The power plug
should be securely connected with the power socket.
•
The power cord for the freezer should not be twisted or pinched.
•
If the power cord needs to be extended. the cross-section of the extended cable must be no less
than 2 mm² and no longer than 3 m.
•
Before using the freezer, check the voltage supply. A voltage stabilizer to deliver rated
voltage ±10% is recommended for areas where the voltage is known to be unstable. The voltage
stabilizer should be rated at least 4000W.
•
The freezer must be securely grounded
•
If the power socket is connected with a ground terminal, make sure to inspect it for proper
connection before using the equipment.
•
If the socket is not grounded, it must be connected to a grounded terminal by a qualifi ed technician.
•
Do not ground the freezer through gas lines, water mains, telephone lines and
lightning rods as this may lead to electric shock.
•
After installation, the power plug must be easy to reach. In case of emergency, it is
easy to unplug. Nothing should block the ventilation port of the freezer.
Installation
Installation environment
Installation site
Caution
Warning
41
• If the freezer operates in authorized mode, fi rst ensure that the magnetic card or fi ngerprint is
registered on it. When you can create a new account, the registration will be completed by swiping
the card or punching the fi ngerprint, meanwhile a magnetic card shall be assigned to the new
account. Only when the magnetic card corresponds to the login account, can the electromagnetic
lock be unlocked.
• If the user does not use the electromagnetic lock temporarily, it can be fi xed with a
clip, so as to ensure that the door can be opened / closed without swiping the card or
using the fi ngerprint.
• When there is a loss of power or the backup battery power is out of power, please
contact technical support personnel should there be aa need to open the freezer door.
•If the card is not swiped or fi ngerprint information is not entered, the door should not
be opened forcibly as it can damage the electromagnetic lock.
Caution
5.Frozen storage rack and frozen storage box
When the freezer stores small size of materials, the frozen storage rack and the frozen storage box
can be used
,
so as to utilize the space more eff ectively.
Model
Storage Rack(Type A/B are available)
Storage Box
variety
Amount
Amount
DW-86L579BP
5×5
16
400
DW-86L729BP
5×5
20
500
DW-86L579BPT
5×5
16
400
DW-86L729BPT
5×5
20
500
DW-86L829BP
5×5
24
600
DW-86L959BP
5×5
28
700
DW-86L829BPT
5×5
24
600
DW-86L959BPT
5×5
28
700
DW-86L959W
5×5
28
700
DW-86L828W
5×5
24
600
Содержание DW-86L579BP
Страница 1: ......
