V. Function description:
1
．
Full display with power on:
In case of full display, all symbols on the LCD will display;
3s after full display, only the clock will display and the initial clock is 12: 00 a.m. The initial
clock is adjustable and will be automatically confirmed after 10s.
2.ON/OFF:
Press this key for power on/off. The default mode of the initial power on shall be Smart
mode, or it shall be the mode of the previous operation.
3.SMART:
(1) SMART is valid in startup & shutdown status;
(2) SMART perform shutdown order under intelligent mode;
(3) Under shutdown and other modes, pressing SMART will enter the initial default setting
of intelligent mode by remote control. The temperature set on the LCD will not display;
(4) Under smart mode, press temperature rise and decrease keys, the temperature value
will display.
4. COOL, HEAT and DRY
(1) In the event of starting up with remote-controller, execute refrigeration, heating and
dehumidification modes after pressing the COOL, HEAT and DRY;
(2) Power-on for the first time: for the temperature and wind speed displayed in each
mode, see the following table; power-on not for the first time: parameters set last time will
display in each mode.
Mode
Smart
Heat
Cool
Dry
Fan
Initial
Temperature
24
℃
24
℃
24
℃
24
℃
The
temperature
set will not
display
Mode
Smart
Heat
Cool
Dry
Fan
Initial Speed
Automatic
Low
High
Automatic
Low
5
.
FAN
(1) In shutdown state, press "HEALTH" key or "FRESH” key to enter the fan mode, the
speed is low and health or fresh air icons will display on the interface at the same time.
(2) In fan mode, the temperature will not display.
(3) There is no automatic speed function in fan mode.
6. FAN SPEED:
(1).The “FAN SPEED” from Low
→
Medium
→
High
→
Automatic to Low in turn.
(2). This key is invalid in shutdown state.
Low
Medium
High
Automatic cycle of low, medium and
high air speed
Automatic
9
Operation
