2.Select operation mode
Press FAN button. For each press, fan speed changes as
follows:
Press MODE button. For each press, operation mode
changes as follows:
Remote controller:
Remote controller:
Then Select DRY operation
Press TEMP. button
Every time the button is pressed, temp.setting
increase 1
o
C,if kept depressed, it will increase
rapidly
Every time the button is pressed, temp.setting
decrease 1
o
C,if kept depressed, it will decrease
rapidly
Select a desired temperature.
4.Fan speed selection
3.Select temp.setting
5.Unit stop
AUTO
LOW
MED
HI
AUTO
COOL
DRY
FAN
HEAT
Operation
Dry Operation
1. Unit start
On the displaying board,colorful displaying bar will be
light blue
Air conditioner is running under displayed fan speed.
In DRY mode, when room temperature becomes
lower than temp.2
o
C,unit will run intermittently
at LOW speed regardless of FAN setting.
Press on/off button (" ") on the remote controller, unit starts.
Remote controller
Press on/off button (" "), the unit stops.
SWING
CODE
TEMP
LOCK
RESET
LIGHT
TIMER
SET
CLOCK
FRESH
SLEEP
MODE
HEALTH
FAN
H.AIR.
COOL operation starts when room
temp.is higher than temp.setting.
On reaching temp.s2
o
C
unit will run in mild DRY mode.
Ultra-low air flow
Temp.2
o
C
Temp.setting
12
