5.Unit stop
When FAN is set to AUTO, the air conditioner
automatically adjusts the fan speed according to room
temperature.
Press on/off button (" "), the unit stops.
Operation
2.Select operation mode
Press FAN button. For each press, fan speed changes as
follows:
Press MODE button. For each press, operation mode
changes as follows:
Remote controller:
Remote controller:
Then Select HEAT operation
Press TEMP. button
Every time the button is pressed, temp.setting
increase 1
o
C,if kept depressed, it will increase
rapidly
Every time the button is pressed, temp.setting
decrease 1
o
C,if kept depressed, it will decrease
rapidly
Select a desired temperature.
4.Fan speed selection
3.Select temp.setting
AUTO
LOW
MED
HI
AUTO
COOL
DRY
FAN
HEAT
Heat Operation
1. Unit start
Air conditioner is running under displayed fan speed
IN HEAT mode, warm air will blow out after a short period
of the time due to cold-draft prevention function.
On the displaying board,colorful displaying bar will be red
Press on/off button (" ") on the remote controller, unit starts.
Remote controller
SWING
CODE
TEMP
LOCK
RESET
LIGHT
TIMER
SET
CLOCK
FRESH
SLEEP
MODE
HEALTH
FAN
H.AIR.
14
