HAI OMNISTAT RC-122, Руководство пользователя

Страница: 16 / 20

Repeat steps 1-6 for the
DAY
,
EVE
, and
NITE
periods. Afterwards,
repeat steps 1-6 for 4 daily periods on Saturdays (Day 6), and 4
daily periods on Sundays (Day 7). The temperature display will
show "6" for Saturdays, and "7" for Sunday times.
Note: If Programming Mode is not being used and Day/Night Mode
is being used, only the Weekday -
DAY
and
NITE
settings can
be programmed.
DAY/NIGHT MODE
Your thermostat can be configured to change its temperature settings
from
"DAY"
to
"NITE"
when commanded from a remote location.
If so, the thermostat will use the weekday
"DAY"
and the weekday
"NITE"
settings.
"REMOTE"
and either
"DAY"
or
"NITE"
will be displayed when a
command is sent from a remote location. You can use the arrow keys
(
∧
-
∨
) to override the temperature settings, or press the Hold key to
prevent any future remote changes.
Follow the procedure shown in Programming Mode, to change the
programmed
DAY
and
NITE
settings.
SYSTEM MODE
Your thermostat can be connected to an automation system or
personal computer. With network software, the remote system can
send commands to the thermostat to change mode, cool setting, heat
setting, status of fan and hold, and other items.
"REMOTE"
will be displayed when a command is sent from the
automation system or personal computer. You can use the arrow
keys (
∧
-
∨
) on the thermostat to change the temperature settings.
When the temperature settings are changed at the thermostat,
"REMOTE"
will no longer be displayed. Press the Hold key to
prevent thermostat programs or the remote system from changing
temperature settings.
"HOLD"
will be displayed at the thermostat.
12