HAI OMNISTAT RC-112, Руководство по установке, Страница: 11 / 16

1
1
1
1
14 Clock adjust
If the clock on the thermostat is running faster or slower than the actual time, you can have the thermostat
automatically compensate up to 29 seconds per day. The thermostat will add or subtract the selected amount of
time daily.
(1 = “- 29” to 59 = “+ 29” seconds per day; 30 = No change)
The default setting is 30.
Note: If an HAI automation system is being used, the controller system time is sent to the thermostat every
minute. This adjustment will have no effect.
15 Filter
reminder
The thermostat logs the amount of time the system fan has been running. When this setting reaches 0, the
thermostat will display a reminder to replace the filter. The setting is the amount of days (24 hours of system
operation) before this reminder is displayed.
Days - Counting down from 10 - 0
The filter reminder can be disabled by setting this item to 60.
16
System runtime (This week)
This item logs the amount of time (hours) that the heating and cooling system was in operation this week.
17
System runtime (Last week)
This item logs the amount of time (hours) that the heating and cooling system was in operation last week.
ANTICIPATION
RC-112 anticipation is performed electronically and is independent of the type and load of the components in
the heating and cooling equipment. The RC-112 has electronic control based on proportional, integral and
derivative components and maintains temperature to within 1 degree F. of the setting. Anticipation is not
adjustable on the RC-112.
OWNER'S MANUAL
Following Installer Setup, check the option boxes (
) in the Owner's Manual according to the configuration of
the thermostat.