Page 9
Specifications
Zones 1-8 Power Amplifier Outputs
Continuous Average Output Power:
30W (15W x 2) Two channels driven 30-20kHz @1% THD
Rated Distortion (1/2 power):
0.40%
Rated Impedance:
6 Ohms
Damping Factor:
50+
Frequency Response (20-20kHz):
±2dB
Preamplifier Section
Variable output:
0-600mV
Impedance:
600
Ohms
Source Inputs 1-6
Input Impedance:
10K
Input Sensitivity for rated power:
300mV RMS
Input Overload:
3V RMS
Emitter Outputs
Output Drive Current:
100mA
Output Drive Voltage:
5V
System
System On:
5V @ 50mA (Ring = Ground)
Page / Mute input:
Normally open (close to activate)
Power Requirements
Power Supply Input (each):
100-240VAC, 50/60Hz, 120W
Power Supply Output (each):
30VDC, 3 Amps
Power Consumption
All channels driven to full-rated power:
240W
Average operating conditions:
30W
No signal:
Less than 10W
Physical Specifications
Unit Size (in enclosure):
13” W x 13” H x 4.5” D
Unit Size (on mounting plate):
13.25” W x 8.5” H x 3.75” D
Unit Weight (in enclosure):
14 lb.
Unit Weight (on mounting plate):
8 lb.
