6
7
Setup.
2: Make sure both rotary knobs are
turned all the way to the left. This is
the most relaxed position (fig. 8).
3: Pull both straps through the
fixlock buckles until the positioning
belt fits comfortably but firmly on
the pelvis and thighs (fig. 9).
4: Check the amount of tension between
the padding and client using your finger.
5: Check whether the positioning belt is centered correctly
(fig. 10). The measurements on the straps can be used as
guides.
Now close both fixlock buckles. The positioning belt is now
ready for use.
Fig. 9
Fig. 10
Regularly check the tension on the belt and
adjust if necessary.
Fig. 8
Fine tuning for comfort or
additional support.
The positioning belt can easily be adjusted at any time
Turning the rotary knobs clockwise increases the tension
on the belt. This can be judged with a finger between
the padding and the client. Increase tension until proper
pelvic support is achieved. To ease tension, turn the knobs
counterclockwise (fig. 11).
Fig. 11
Clear loose straps.
To prevent the loose ends of the straps from getting between
rotating/moving parts of the wheelchair, they must be secured
using the belt guides.
Slide the end of the strap through the guide (fig. 12) and
secure the strap using the clip (fig. 13).
Fig. 13
Fig. 12
