background image

WaterMax 60 Series Owner’s Manual 

11/10/2008 

25 Year Limited Warranty

TO PLACE THIS EQUIPMENT UNDER WARRANTY, THE 
WARRANTY REGISTRATION CARD MUST BE COMPLETED 
AND RETURNED BY THE ORIGINAL OWNER TO HAGUE 
QUALITY WATER INTERNATIONAL WITHIN 30 DAYS OF 
INSTALLATION.

Coverage

This warranty covers the Hague 

WaterMax

®

 Appliance 

delivered to the original owner when the appliance is purchased 
for personal, family, or household use. It is intended to cover 
defects occurring in workmanship or materials or both. 

Warrantor’s Performance and Length of Warranty 

Hague Quality Water International warrants that upon receipt 
from the owner of any Hague Media Tank, Brine Tank, Valve 
Body, or the fine mesh polystyrene resin found to be defective in 
material or workmanship, Hague will repair or replace the 
defective item, at no charge for that item, for 25 YEARS from 
date of installation. 

Hague Quality Water International further warrants that upon 
receipt from the owner of any other mechanical or electronic 
parts, which are found to be defective in material or 
workmanship, Hague will repair or replace the defective parts, at 
no charge for those parts for 3 YEARS from date of installation; 
and thereafter will repair or replace the defective parts only upon 
receipt of payment by the owner of the defective parts of the 
following percentages of the then current list prices for the parts: 

Number of

Years From 

Installation Date 

% Owner Pays for 

Repair/Replacement 

of Parts 

3–4 Years 

50% 

4–5 55 
5–6 60 
6–7 65 
7–8 70 
8–9 75 
9–10 80 

10+ 100 

All defective parts must be returned, along with the equipment 
serial number and date of original installation, to an authorized 
Hague dealer of Hague Quality Water International PREPAID, 
and replacement parts will be returned by Hague to the owner 
FREIGHT COLLECT. 

Further Exclusions and Limitations on Warranty:  
This warranty is null and void unless the Hague Appliance 

was purchased from an independent Hague dealer. THERE 
ARE NO WARRANTIES OTHER THAN THOSE DESCRIBED 

IN THIS WARRANTY INSTRUMENT. 

This warranty does not cover any service call or labor costs 
incurred with respect to the removal and replacement of any 
defective part or parts. Hague Quality Water International will 
not be liable for, nor will it pay service call or labor charges 
incurred or expended with respect to this warranty. 

In the event the water supply being processed through this 
product contains sand, bacterial iron, algae, sulfur, tannins, 
organic matter, or other unusual substances, then unless the 
appliance is represented as being capable of handling these 
substances in the appliance specifications, other special 
treatment of the water supply must be used to remove these 
substances before they enter this product. Otherwise, Hague 
Quality Water International shall have no obligations under this 
warranty.

This warranty does not cover damage to a part or parts of the 
appliance from causes such as fire, accidents, freezing, or 
unreasonable use, abuse, or neglect by the owner. 

This warranty does not cover damage to a part or parts of the 
appliance resulting from improper installation. All plumbing and 
electrical connections should be made in accordance with all 
local codes and the installation instructions provided with the 
appliance. The warranty does not cover damage resulting from 
use with inadequate or defective plumbing; inadequate or 
defective water supply or pressure; inadequate or defective 
house wiring; improper voltage, electrical service, or electrical 
connections; or violation of applicable building, plumbing, or 
electrical codes, laws, ordinances, or regulations. 

THIS WARRANTY DOES NOT COVER INCIDENTAL, 
CONSEQUENTIAL OR SECONDARY DAMAGES.  

ANY IMPLIED WARRANTIES ON THE PRODUCT 
DESCRIBED IN THIS WARRANTY WILL NOT BE EFFECTIVE 

AFTER THE EXPIRATION OF THIS WARRANTY. 

No dealer, agent, representative or other person is authorized to 
extend or expand this limited warranty. 

Some states do not allow limitations on how long an implied 
warranty lasts or the exclusion or limitation of incidental or 
consequential damages, so the above limitations and exclusion 
may not apply to you. This warranty gives you specific legal 
rights and you may also have other rights which vary from state 
to state. 

Claims Procedure 

Any defects covered by this warranty should be promptly 
reported to Hague Quality Water International at 4343 South 
Hamilton Road, Groveport, Ohio 43125. In writing about the 
defects, please provide the original owner's name, telephone 
number, and original address; serial number and model number 
of the product; date of purchase; and name of dealer from whom 
purchased. Hague Quality Water International reserves the right 
to replace defective parts with exact duplicates or their 
equivalent.

Содержание WATERMAX 60 SERIES





















































Отзывы: