Hagstrom KE-USBMX20 Скачать руководство пользователя страница 26

Страница: 26 / 28

Introduction to the KE-USBMX20

Our KE-USBMX20 Keyboard Encoder is a product designed to interface

Matrix Keypads, Membrane Switches, and/or other contact closures

to the computer’s USB port. Devices connected to the KE-USBMX20

Input header produce keystrokes that appear to the PC as if they were

entered from a standard USB keyboard. The KE-USBMX20 can scan

any matrix up to a 5 x 4 arrangement.

The KE-USBMX20 is programmable by the user. This programmability

feature allows the conﬁguration of the matrix row and column pins as

well as the selection of the keystrokes that will be sent to the PC for

each matrix position. The user’s conﬁguration is stored in non-volatile

memory so that the information is retained on the unit even after

power is turned off. Responses to each key can be programmed as a

single keystroke or a macro sequence of keystrokes.

The KE-USBMX20 Input Header

The 9 pin header provides 9 signals that can be programmed to scan

any size matrix up to 5 x 4. Any of the Input pins may be designated as

either a Column or a Row. The KE-USBMX20 conﬁgures its scanning to

the keypad, allowing the direct 1:1 connection to the header of many

“off the shelf” keypads without any cabling.

Power Requirements and Hardware

The KE-USBMX20 requires no external power source. It is powered

directly from the USB port on the PC. One micro-B to A Type USB cable

is provided with the unit.

Supported Devices

All devices with a standard USB port will work with the KE-USBMX20.

The KE-USBMX20.EXE conﬁguration program is for Windows based

systems, but once programmed, the KE-USBMX20 may be moved to

another platform that supports a standard USB keyboard.

Default Settings

The KE-USBMX20 is programmed and shipped with a default 5x4

matrix conﬁguration. This default conﬁguration can be changed or

modiﬁed at any time by the user with the KE-USBMX20.exe program.

Accessories

Appendix B:

Command Line Loader

The KE-USBMX20 can also be loaded through the command line by

using the supplied KE-USBMX20LOAD.EXE program. Refer to readme.

txt located under the Command Line Loader folder on the supplied

CD ROM for further details.

Connection to Membrane Female

#PH-9-RA

Connection to Discrete Wires

#MTA100-9H-12

The PH-9-RA is a 9 pin male right

angle header that attaches from

the KE-USBMX20 header to a

female membrane switch header.

The MTA100-9H-12 provides 9

individual wires that are attached

to a connector which plugs

directly into the KE-USBMX20

header.

Use this harness to attach to

individual switches or keypads

that do not have a single row

male header for direct plug in to

the KE-USBMX20.

Содержание KE-USBMX20





























Результаты поиска

Содержание KE-USBMX20

Отзывы:

Похожие инструкции для KE-USBMX20

Бренды по названию

Популярные бренды

Hagstrom KE-USBMX20, Руководство пользователя

Результаты поиска

Содержание KE-USBMX20

Отзывы:

Похожие инструкции для KE-USBMX20

Бренды по названию

Популярные бренды