Haglof DP II, Руководство пользователя

Страница: 16 / 28

User Manual Version: 1.2
DP II Revised: 2015-03-16 15:47
12
| © Haglöf Sweden AB 2013/Rev. 201503
Start a new program
A new program is started by selecting the menu ”Reset”
(usually placed as a sub menu under “SETTINGS”). After
a reset, the DP II will display a list of downloaded pro-
grams. Select one of the alternatives and press ENTER.
Go to ”START” menu to start the program.
A program can also be started with a caliper reset (press all
five (5) buttons at the same time). Select menu ”SELECT
PROGRAM”.
The program that was last used will start in the start menu.
Upgrading the BIOS
BIOS is the program that handles all hardware in the
caliper. The BIOS needs to be upgraded on occasion as
follows:
1.
Reset the DP II by giving a short press on all five (5)
buttons at the same time on the terminal. The DP II
resets.
2.
Navigate to the ”USB” menu with right arrow button.
3.
Press Enter.
4.
Connect the USB adapter to the DP II and the USB
cable to the USB adapter and PC.
5.
The PC operating system will initiate connection to the
DP II. The DP II now works as a USB memory stick
(MSD device)
6.
Start the PC file explorer and copy the new Bios file
(ex. ”DP2 V2.0.DPB”) to the root directory. In the
root directory you need to have the file ”BiosLoadV10.
DPL”.
7.
Disconnect the PC with Escape in the DP II.
8.
Remove the USB adapter by releasing the stop and
pulling the USB adapter backwards.
9.
Reset the DP II with a short press on all five (5) but-
tons at the same time. The DP II restarts and updates
the Bios.
System menus
♦
RESET
The operating system is started with a reset that can be
forced by pressing all five (5) buttons simultaneously.
Several functions in the operating system are reached from
below the system menu.
♦
LANGUAGES
Several menus and commands in the system menu are
translated to different languages. Select the language menu
and set your preferred language with ENTER. Check the
time and date settings in the terminal settings.
♦
START
Start the last used application and press ENTER to execute
the application. A license number should normally be stated
before starting to use an application. You can run an applica-
tion for five (5) days as trial before stating a license number.
This number can be purchased from your DP II distributor
and stated in the following menu, SELECT PROGRAM.
♦
SELECT PROGRAM
Use the SELECT PROGRAM menu to select applica-
tion. Press arrow button up- or down to select, followed by
ENTER. To start the application, select START and press
ENTER. INFO contains information on licenses and date
for download of program.
Delete all
Use the ”Delete all” if you wish to delete all downloaded
applications. Individual applications can be deleted through
menu SELECT PROGRAM. Select which application to
delete.
LICENSE
A license key will be obtained from your Haglöf Sweden DP
II distributor. If you do not have a license key, note the serial
number SerNo and PROD before contacting your distribu-
tor. To activate the license, select menu SELECT PRO-
GRAM and press ENTER. Use the up- or down button to
select the application and press ENTER. Select LICENSE
and press ENTER. State your code with the up- or down
buttons to increase/decrease the value of cursor. Use the left-
and right button to move cursor to next position. Store the
code with ENTER.
Delete program
To delete a program in the computer terminal select menu
SELECT PROGRAM in the system menu and press EN-
TER. Use the up- or down button to select application and
press ENTER. Select DELETE and press ENTER.
Files
The operating system provides a menu where all files that
have been created and stored can be deleted or transferred to
PC or other external terminal. Files can contain data from
applications. Before deleting a file or formatting the flash
disc, make sure that no important data is left in the files.
Files can normally be deleted straight from an application
without the need to activate the system menu.
1. Reset the computer terminal by pressing all five (5)
buttons at the same time.
2. Press ENTER to go to the SYSTEM MENU.
3. Select the FILE menu.