Hagleitner XIBU, Советы и рекомендации

Страница: 34 / 48

XIBU touchTOWEL
Replacing the cutting unit assembly
Tools used:
Phillips screwdriver, size PH1
slot screwdriver, size 2
Problem:
Paper jam; paper is cut badly or not at all.
Solution:
Clean the cutting unit, remove paper residues
from the cutting unit or between the gears.
Open lid

Remove paper roll

Press the hand button back and insert the
XIBU key (Fig. 2). Undo the two screws at the
cutting unit (Fig. 3).
Push down the latches at the left and right
with a flat-tip screwdriver to remove the cut-
ting unit (Fig. 4).
Fig. 2
Fig. 4
Fig. 1: cutting unit
Fig. 3
34 | Tips & Tricks | January 2018
Loosen screws!