Hagie NTB Series Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 31

Hagie NTB Series Скачать руководство пользователя страница 22

17

ATTACHMENT SYSTEM

Detach NTB from Machine

FOLLOW THESE STEPS:

1. Determine proper storage location to place the NTB once it is unhooked from the machine.

WHERE TO STORE IT? -

When choosing a place to store the attachment, there

are three important things to keep in mind.

First of all, is the ground

level

? The ground must be level to help prevent damage

caused to attachment by falling over. Level ground will also minimize stress on the

frame of the attachment while in storage and ease of attachment hook-up.

Second, is there enough

space

? The NTB attachment is folded up for it to stand

properly but be aware of the room that is needed for the attachment and adequate

space to travel around it safely.

If you are storing the boom in a building, make sure that you have adequate room

around it to safely pass by.

Third, is it

accessible

? The NTB attachment needs to be positioned so you can

connect to the attachment easily.

If temporarily storing the attachment on a soft surface, such as grass, you may

want to put blocks or wood under the coulters to prevent the attachment from

sinking into the ground. It is NOT recommended to store an NTB attachment on a

soft surface for an extended period of time due to the risk of settling soil even when

blocks are used.

2. Lower the NTB down to the level storage location.

*NTB attachment should be in the folded position.

Figure 16: Folded position for 12 and 16 row NTB

«
...
20
21
22
23
24
...
»

Содержание NTB Series
































Отзывы:

Нет отзывов