![background image](http://html2.mh-extra.com/html/hagerman/screamer/screamer_manual_3198982006.webp)
SCREAMER – Distortion Pedal
6
Circuit Board
Follow the schematic.
•
Add resistors. Solder in place, clip leads.
•
Add film capacitors. Solder, clip.
•
Add integrated circuit. Insure pin 1 orientation is correct.
•
Add electrolytic capacitors.
External Components
•
Cut 11 pieces of 2” length wires. Strip ends about 3/16”.
•
Solder wires to input and output jacks, pots.
•
Remove tab from pots.
•
Cut 2” from end of battery clip wires.
•
Solder components with wires to PCB as shown.
•
Mount and solder footswitch.
Содержание SCREAMER
Страница 1: ...SCREAMER Distortion Pedal Made in USA...