SCREAMER – Distortion Pedal
8
•
Drop assembly into place, such that LED leads feed through holes in PCB. Apply
white washer and nut to front of footswitch. Do not tighten yet.
•
Slip input and output jacks into mounting holes; add washers and nuts. Tighten.
•
Slip pots into mounting holes; add washers and nuts. Tighten.
•
Tighten footswitch nut, making sure PCB is not rotated.
•
Solder LED.
•
Solder red and black wires to holes in PCB as shown.
•
Solder battery clip, red wire to center solder lug on DC jack; black wire to “-“ hole
on PCB.
•
Add knobs.
•
Attach bottom cover.
•
Add feet.
Содержание SCREAMER
Страница 1: ...SCREAMER Distortion Pedal Made in USA...