hager TJA560, Руководство по установке

Страница: 6 / 43

IoT Controller TJA560
Installer Manual
6
The following table recapitulates the interpretation of each LED
LED function LED ref Status Description
Power

Off Unit without power
Blinks green Unit start-up phase
Lights up green Unit started
Blinks red Unit supplied by the power reserve (10 s
max)
Lights up red OS loading error
KNX

Off Unit supplied by the power reserve (10 s
max)
Blinks green Connected to the KNX bus - bus traffic
Lights up green Connected to the KNX bus
– no bus traffic
Lights up red No KNX bus connection
Ethernet 1 and
2

et

Off No network (or operating on power reserve
–
10 s max)
Blinks green No DHCP server detected, operating on
fallback IP address
Lights up green Network detected and IP address allocated
Lights up red IP address conflict
Blinks red Waiting for IP address allocation
Portal

Off No Hager portal connection
Blinks green Hager portal connection attempt
Lights up green Hager portal connection established
Lights up red Hager portal connection inaccessible or
connection refused
Bus voltage
present

Lights up red Check the bus voltage with a short press of
button

. Red LED lit indicates KNX bus
present.
SOFTWARE VERSION UPDATE FOR THE CONFIGUARATION SERVER 2.4
It is mandatory to update the IoT Controller software version before any first use.
The update is carried out Automatically when the IoT Controller is connected to an Internet box.
Connection to the network and the remote server is made automatically for the update (see chapter 5.8.7 for
configuration of the automatic update).