28
Handset display
in standby mode
RADIO LINK
HANDSET
ACCESS
TAGS
PIN
DISPLAY
SOUNDS
PARAMETERS
PULSE
INFOS
VOLUMES
NIGHT MODE
STRIKE SOUND
Menu
Setting
possible
Using the setting
NIGHT
MODE
ACTIVE
INACTIVE
Factory:
INACTIVE
Can be used to lower the volume of a button when it is pressed
or of ringing on the outdoor caller unit (the volume is lowered to
QUIET).
Factory: LOW
STRIKE
SOUND
INACTIVE
LOW
HIGH
Can be used to disable or adjust the volume on the outdoor
caller unit when an electrical latch is operated.
IMPORTANT: the NIGHT MODE menu is only displayed if the door phone
system has been fitted with an MHF01X or MHF02X caller unit.
Handset display
in standby mode
RADIO LINK
HANDSET
ACCESS
TAGS
PIN
DISPLAY
SOUNDS
PARAMETERS
PULSE
INFOS
AUTO COMMAND
Menu
Setting
possible
Using the setting
AUTO
COMMAND
Factory:
ELECTRIC STRIKE
Can be used to define the command issued when a tag is
detected or a code entered.
KEYPAD
When a tag is used or a code entered, the system waits for the
or
key to be pressed in order to open a latch or a gate
control system.
ELECTRIC
STRIKE
Latch opening (or side gate opening or closing if no latch is
connected) will be directly triggered when a tag is used or a
code entered rendering it unnecessary to press
.
GATE
Gate opening or closing will be directly triggered when a tag is
used or a code entered rendering it unnecessary to press
.
IMPORTANT: the KEY setting is only displayed if the doorphone system
has been fitted with an outdoor caller unit with keypad.
11.6 Modifying control options
