6
6LE001152A.f
&
MANUAL Mode LED indication.
(yellow steady light when in Maual Mode).
é
AUTO Mode LED indication
(green steady light when in Auto mode
with no timers running, green fl ashing light
when in Auto with timers running in the
background).
"
REMOTE CONTROL Mode LED indication.
Yellow steady light when in remote control
mode.
Remote control mode is achieved with the
Auto/Manu selector switched to Auto and
terminals 312 closed with terminal 317.
Remote control orders are received through
closing 314 to 316 with 317.
'
TEST ON LOAD CONTROL Mode LED
indication (yellow steady light when in TON
mode)
(
TEST OFF LOAD CONTROL Mode LED
indication (yellow steady light when in TOF
mode).
§
Switch 1 LED position indication.
(green when in position 1).
è
Source supply I availability LED indication
(green when supply I voltage is within the
set limits).
!
Zero position LED indication
(yellow when in position 0).
ç
Switch 2 LED position indication.
(green when in position 2)
a
Source supply II availability LED indication
(green when supply II voltage is within the
set limits).
z
Sealing screw location 1 for use with
sealing cover (available as an accessory
e
Potentiometer 1: Network Confi guration.
(Auto Confi guration
or
refer to the confi guration guide sticker on
the front of the product when using the
predefi ned setting positions 1 to 13).
r
Potentiometer 2 : Voltage and Frequency
threshold settings. (Refer to the
confi guration guide sticker on the front of
the product to set the V / Hz threshold.
Positions 1 to 14).
t
Potentiometer 3: Supply FAILURE Time (FT)
Adjustable from 0 to 60 seconds
y
Potentiometer 4: Supply RETURN Time (RT)
Adjustable from 0 to 60 minutes.
u
READY LED indication (green steady light:
product in AUTO, Watchdog OK, Product
Available to changeover; green fl ashing:
settings displayed not saved or have been
changed since last saved. Press PROG OK
button in manual mode to save or revert to
last saved settings).
i
Sealing screw location 2 for use with the
sealing cover.
o
FAULT LED indication (red steady light in
case of an ATS controller internal fault).
p
Confi guration dip switches:
(4 dip switches with 2 positions in each A
to H).
q
PROG OK: confi guration save push button
(ATTN: active in Manual Mode ONLY).
Press briefl y to confi rm and save all set
confi guration settings.
Hold pressed for 2 seconds to set the
network supply voltage and frequency by
Auto Confi guration.
This is to be followed by pressing briefl y to
save the set value confi gured.
s
Green LED Indication: power
d
Red LED Indication: Product Unavailable /
Manual Mode / Fault Condition
f
Auto / Manual mode selector switch (Kky
version available as an option)
g
Padlocking facility (up to 3 padlocks of dia.
4 – 8mm)
h
Emergency manual operation shaft location
(accessible only in manual mode)
j
Switch position indication window:
I (On switch I)
O (Off)
II (On switch II.)
7A. Automatic operation
Ensure that the
emergency handle
is not inserted in the
product and turn
the mode selector
to the AUT position.
LED green = “Power” :
ON
LED Manuel/Default :
OFF
LED green "AUT": ON
7B. Automatic operation:
remote control
Impulse 60 ms
Impulse
maintened
To enable control,
close contact 312 with
317.
For contactor logic
bridge contact 316
with 317.
To operate: close the
contact corresponding
to the desired position.
To force the product to 0 position “OFF” bridge
contact 313 with 317.
7C. Manual operation
90°
90°
I
II
0
7D. Padlocking mode
(Standard: in position O)
Foreseen for max. 3 padlocks Ø 4-8mm
Impulse logic
Contactor logic
Order I
Order O
Order II
Position I
Position O
Position II
AUT
AUT
f
g
h
j
è
§
é
&
"
'
i
s
d
o
p
u
q
a
z
!
ç
t
e
y
r
(
