Häfele HC-IF77D, Руководство пользователя

Страница: 19 / 52

19
Booster function
Residual Heat
The determination of how long a cooking zone has residual heat after operation and switch
off • which may lead to burnings when contacting • is calculated. Status is calculated de -
pending on: Selected power stage (•0“ bis •9“) On/Off Time of the Relays
The residual heat indication of each cooking zone remains activated until the calculated
temperature is smaller than + 60 •C.
Automatic Switch-off (Operating Time Limitation)
Protection against unintentional activation
For each activated cooking zone a max. operating time is defined. The max. operating time
is depending on the selected cooking stage. After the expiration of the max. operating time
the cooking zone is automatically switched off. Each actuation of the cooking zone status
(changing the cooking level etc.) resets the count-down timer to the initial starting value.
Timer settings takes priority vs. operating time limitations for high cooking stage setting.
The electronic system cuts off automatically in case of an identified permanent use of keys
for about 10 seconds. The control unit releases an audible signal for 10 sec of the malfunc -
tion (period: 1000 msec, 500 msec ON) and the error code “E R 0 3” flashes on the display
(0.5 s ON 0.5s OFF). If the permanant actuation exceeds 10sec, alone the error code “ER
03“ keeps flashing as long as the malfunction occurs and is identified as such. In case the
cooking zone is at stage “hot“ the [H] symbol alternates with the error code (0.5 sec Symbol
0.5 sec “H“).
OPERATION
After selection of a respective cooking zone, the power function can be selected directly via
the power function key “3”. By means of this function certain cooking zones are enabled to
receive power over the nominal. If the desired cooking zone has the capacity to activate the
booster, the display shows a “P“ symbol. The boosting time is limited to 5 min to protect
cooking utensils. After the booster is switched off automatically, the cooking zone continues
operation on power level “9”. The booster can be reactivated after some minutes.
In case that the pan is removed from the cooking zone during boosting, the boosting func-
tion remains active and boosting time continues.
NOTE:
When selecting the Booster function on any of the rear areas (left or right), the front
area located on the same side will automatically switch off (if it was already switched on)
in order to focus all the power on the rear area. This allows you to benefit from an extra
powerful Booster. However, when selecting the Booster function on any of the front areas
(left or right), the rear area located on the same side may be operated up to power level 8,
as it will not require as much energy input.