Häfele HC-IF77D, Руководство пользователя

Страница: 18 / 52

18
OPERATION
Automatic Parboiling (selectable)
When Automatic parboiling is activated, the power of the cooking zone is
switched to 100% for a period of time depending on the selected onboiling
stage. As soon as the parboiling time is over, the preselected onboiling
stage is valid again.
Procedure to start Automatic parboiling:
The control unit is switched on and a cooking zone is selected.
After setting cooking stage “9“ Automatic parboiling is activated by pressing at the right
slider sensor. “A” appears on the display immidiately.
Now the required onboiling stage is selected via Slider area . The “A” symbol appears after
3 sec upon releasing the key alternating with the onboiling stage (500 msec •A“ and 1.5 sec
onboiling stage).
The onboiling stage may be changed within 15 sec after activation without switching off the
parboiling boost. Therefore, the cooking zone is to be selected and the relevant cooking
zone is to be set afterwards.
In case of a selection after 15 sec a lower cooking stage may be set; automatic onbboiling
is switsched of. a higher onboiling stage may be selected; this leads to the parboiling time
being automatically brought in line with the currently selected onboiling stage
Dual Cooking Zone (Fig. 7-b) There is a further option of two single cooking zones operating
together as if they were a single zone. The possible cooking zone combinations are A+B
or C+D. This function is enabled by simultaneously pressing the selection keys “8” on both
the zones to be combined. The following symbol will then be shown on display “8” of the
rear area:
Display “8” located on the front area will indicate the power level selected for the combined
zone. This function makes it possible to obtain a rectangular cooking zone, particularly suit-
ed to rectangular or oval-shaped pans. If you are using a round pan, the minimum diameter
of the base should be 20 cm in order to ensure optimal detection.