Häfele HC-I302D, Руководство пользователя

Страница: 19 / 52

19
Automatic Switch-off (Operating Time Limitation)
Protection against unintended switching-ON
Locking system
Dependent on the selected setting, every cooking zone will be switched of after a defined
maxinmum operation time if no operation of the assigned cooking zone follows within this
time period. Every change of the cooking zone condition (by means of the PLUS-, MINUS-
key) puts back the maximum operation time of this cooking zone to the initial value of the
operating time limitation.
•- If the electronic control realizes a continuous operation of keys for approx. 10 seconds, it
switches OFF automatically. The control sends out an audible failure signal for 10 seconds,
so that the user can remove the object which has been mistakenly placed onto the opera-
tion surface. The displays show the failure code “ E R 0 3 “
- If the failure carries on for more than 10 seconds, only the code “E R 0 3 “ will be displayed
as long as the failure will be recognized by the electronic control. If the cooking zone is in
the “hot” status, “H“ will appear on the display in alteration with the failure notice.
- If no cooking zone will be activated within 20 seconds after switching-ON by means of
the Power-key, the control switches back from the ON-condition into the stand-by-mode.
•- When the control is switched- ON the ON/OFF-key has priority over all other keys, so that
the control can be switched-OFF anytime, even in case of multiple or continuous operation
of keys.
•- In the stand-by mode a continous operation will not be signalized. However, before the
electronic control can be switched-ON again, it has to recognize that all keys are not op-
erated.
The actuation of the key lock key “7” in the wait or active mode locks the keyboard a key
symbol appear in the displays “8”:
Here, the actuation times of the key-lock key have to be taken into account. The control
continues to work in the set mode, but may no longer be operated with any key, except the
key-lock key itself or the on/off key “1”.
The switching OFF with the on/off key “1” is also possible in the locked condition. The lock
symbol in display “8” fades when switching off the control. The key-lock function included
the lock symbol in display “8” is active again when switching on (in wait mode 20 s) until this
is deactivated by a repeated actuation of the key-lock key. The activation/deactivation of
OPERATION