Häfele HC-I302D, Руководство пользователя

Страница: 17 / 52

17
OPERATION
Switching Off a single cooking zone:
Switching-OFF all cooking zones
Wattage settings
If the touch control is switched on, the cooking zone can be selected by pressing the
button (4) of the corresponding zone. The display (5) of the zone selected lights up, while
the remaining displays are dimmed. if the cooking zone is “hot”, “H” and “0” are alternately
displayed.
Press the PLUS (3) or MINUS (2) button to select a setting and the zone will begin to heat
up.
Once the cooking zone has been selected, the setting can be selected by keeping the
PLUS (3) button pressed down. The setting begins at level 1 and increases by 1 level every
0.4 seconds. When setting “9” is reached, the setting will not be changed further.
If the setting level has been selected using the MINUS (2) button, the start level is “9“ (maxi
-
mum level). Keep the button pressed down to lower the active level by 1 every 0.4 seconds.
When setting “0” is reached, there will be no further setting changed. The setting can only
be changed by pressing the MINUS (2) or PLUS (3) button again
Select the zone to be switched off using the corresponding button (4). The display (5) of the
zone selected lights up, while the remaining displays are dimmed. Press the Cooking zone
(4) and MINUS (2) buttons at the same time and the setting level of the zone is changed
to 0. Alternatively, the MINUS button (2) can be used to reduce the setting level to 0. If a
cooking zone is “hot”, “H” and “0” will be alternately displayed.
Immediate switching-OFF of all cooking zones can be achieved anytime by means of the
ON/OFF key. In the standby- mode an “H“ appears on all cooking zones which are “hot“.
All other cooking zone displays are not illuminated.
The output of the cooking zones can be set in 9 steps which are indicated by the figures “1”
thru “9” by means of Led sevensegment-displays. In case more power is required, select
the boost level (“P”)